solaris 9,10 samba 所在的路徑

/etc/sfw

裡面有一個smb.conf-example

將這個檔案cp 成 smb.conf

#cp ./smb.conf-examble ./smb.conf

並修改smb.conf這個檔案

 

啟動跟停止samba server

#cd /etc/rc3.d

會看到有一個S90samba的啟動程序

#./S90samba stop

#./S90samba start

這樣就可以重新啟動samba server了

簡易的smb.conf設定說明(以下的檔案是solaris 10 的 sample 我修改過的)

 

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options (perhaps too

# many!) most of which are not shown in this example

#

# For a step to step guide on installing, configuring and using samba,

# read the Samba HOWTO Collection.

#

# Any line which starts with a ; (semi-colon) or a # (hash)

# is a comment and is ignored. In this example we will use a #

# for commentry and a ; for parts of the config file that you

# may wish to enable

#

# NOTE: Whenever you modify this file you should run the command "testparm"

# to check that you have not made any basic syntactic errors.

#

#======================= Global Settings =====================================

[global]

 

# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4

   workgroup = WORKGROUP                    <<<<<這個是你的工作群組

   client code page = 950                     <<<<<需要加入這個這樣才可以使用中文

   netbios name = solaris10_samba             <<<<<這是顯示出來的網芳的名稱

# server string is the equivalent of the NT Description field

   server string = Samba_solaris_Server

 

# Security mode. Defines in which mode Samba will operate. Possible

# values are share, user, server, domain and ads. Most people will want

# user level security. See the HOWTO Collection for details.

   security = share                          <<<<設定為share的時候不需要密碼

 

# This option is important for security. It allows you to restrict

# connections to machines which are on your local network. The

# following example restricts access to two C class networks and

# the "loopback" interface. For more examples of the syntax see

# the smb.conf man page

;   hosts allow = 192.168.1. 192.168.2. 127.        <<<<限制可以使用的ip位置,需要的話將 ; 拿掉並設定ip

 

# If you want to automatically load your printer list rather

# than setting them up individually then you'll need this

   load printers = yes

 

# you may wish to override the location of the printcap file

;   printcap name = /etc/printcap

 

# on SystemV system setting printcap name to lpstat should allow

# you to automatically obtain a printer list from the SystemV spool

# system

;   printcap name = lpstat

 

# It should not be necessary to specify the print system type unless

# it is non-standard. Currently supported print systems include:

# bsd, cups, sysv, plp, lprng, aix, hpux, qnx

;   printing = cups

 

# Uncomment this if you want a guest account, you must add this to /etc/passwd

# otherwise the user "nobody" is used

;  guest account = pcguest

 

# this tells Samba to use a separate log file for each machine

# that connects

   log file = /usr/local/samba/var/log.%m

 

# Put a capping on the size of the log files (in Kb).

   max log size = 50

 

# Use password server option only with security = server

# The argument list may include:

#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]

# or to auto-locate the domain controller/s

#   password server = *

;   password server = <NT-Server-Name>

 

# Use the realm option only with security = ads

# Specifies the Active Directory realm the host is part of

;   realm = MY_REALM

 

# Backend to store user information in. New installations should

# use either tdbsam or ldapsam. smbpasswd is available for backwards

# compatibility. tdbsam requires no further configuration.

;   passdb backend = tdbsam

 

# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting.

# Note: Consider carefully the location in the configuration file of

#       this line.  The included file is read at that point.

;   include = /usr/sfw/lib/smb.conf.%m

 

# Most people will find that this option gives better performance.

# See the chapter 'Samba performance issues' in the Samba HOWTO Collection

# and the manual pages for details.

# You may want to add the following on a Linux system:

#         SO_RCVBUF=8192 SO_SNDBUF=8192

   socket options = TCP_NODELAY

 

# Configure Samba to use multiple interfaces

# If you have multiple network interfaces then you must list them

# here. See the man page for details.

;   interfaces = 192.168.12.2/24 192.168.13.2/24

 

# Browser Control Options:

# set local master to no if you don't want Samba to become a master

# browser on your network. Otherwise the normal election rules apply

;   local master = no

 

# OS Level determines the precedence of this server in master browser

# elections. The default value should be reasonable

;   os level = 33

 

# Domain Master specifies Samba to be the Domain Master Browser. This

# allows Samba to collate browse lists between subnets. Don't use this

# if you already have a Windows NT domain controller doing this job

;   domain master = yes

 

# Preferred Master causes Samba to force a local browser election on startup

# and gives it a slightly higher chance of winning the election

;   preferred master = yes

 

# Enable this if you want Samba to be a domain logon server for

# Windows95 workstations.

;   domain logons = yes

 

# if you enable domain logons then you may want a per-machine or

# per user logon script

# run a specific logon batch file per workstation (machine)

;   logon script = %m.bat

# run a specific logon batch file per username

;   logon script = %U.bat

 

# Where to store roving profiles (only for Win95 and WinNT)

#        %L substitutes for this servers netbios name, %U is username

#        You must uncomment the [Profiles] share below

;   logon path = \\%L\Profiles\%U

 

# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server

;   wins support = yes

 

# WINS Server - Tells the NMBD components of Samba to be a WINS Client

#     Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

;   wins server = w.x.y.z

 

# WINS Proxy - Tells Samba to answer name resolution queries on

# behalf of a non WINS capable client, for this to work there must be

# at least one      WINS Server on the network. The default is NO.

;   wins proxy = yes

 

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names

# via DNS nslookups. The default is NO.

   dns proxy = no

 

# These scripts are used on a domain controller or stand-alone

# machine to add or delete corresponding unix accounts

;  add user script = /usr/sbin/useradd %u

;  add group script = /usr/sbin/groupadd %g

;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u

;  delete user script = /usr/sbin/userdel %u

;  delete user from group script = /usr/sbin/deluser %u %g

;  delete group script = /usr/sbin/groupdel %g

 

 

#============================ Share Definitions ==============================

[homes]

   comment = Home Directories

   browseable = no

   writable = yes

 

# Un-comment the following and create the netlogon directory for Domain Logons

; [netlogon]

;   comment = Network Logon Service

;   path = /usr/sfw/lib/netlogon

;   guest ok = yes

;   writable = no

;   share modes = no

 

 

# Un-comment the following to provide a specific roving profile share

# the default is to use the user's home directory

;[Profiles]

;    path = /usr/local/samba/profiles

;    browseable = no

;    guest ok = yes

 

 

# NOTE: If you have a BSD-style print system there is no need to

# specifically define each individual printer

[printers]

   comment = All Printers

   path = /var/spool/samba

   browseable = no

# Set public = yes to allow user 'guest account' to print

   guest ok = no

   writable = no

   printable = yes

 

# This one is useful for people to share files

;[tmp]

;   comment = Temporary file space

;   path = /tmp

;   read only = no

;   public = yes

 

# A publicly accessible directory, but read only, except for people in

# the "staff" group

;[public]

;   comment = Public Stuff

;   path = /home/samba

;   public = yes

;   writable = yes

;   printable = no

;   write list = @staff

 

# Other examples.

#

# A private printer, usable only by fred. Spool data will be placed in fred's

# home directory. Note that fred must have write access to the spool directory,

# wherever it is.

;[fredsprn]

;   comment = Fred's Printer

;   valid users = fred

;   path = /homes/fred

;   printer = freds_printer

;   public = no

;   writable = no

;   printable = yes

 

# A private directory, usable only by fred. Note that fred requires write

# access to the directory.

;[fredsdir]

;   comment = Fred's Service

;   path = /usr/somewhere/private

;   valid users = fred

;   public = no

;   writable = yes

;   printable = no

 

# a service which has a different directory for each machine that connects

# this allows you to tailor configurations to incoming machines. You could

# also use the %U option to tailor it by user name.

# The %m gets replaced with the machine name that is connecting.

;[pchome]

;  comment = PC Directories

;  path = /usr/pc/%m

;  public = no

;  writable = yes

 

# A publicly accessible directory, read/write to all users. Note that all files

# created in the directory by users will be owned by the default user, so

# any user with access can delete any other user's files. Obviously this

# directory must be writable by the default user. Another user could of course

# be specified, in which case all files would be owned by that user instead.

;[public]

;   path = /usr/somewhere/else/public

;   public = yes

;   only guest = yes

;   writable = yes

;   printable = no

 

# The following two entries demonstrate how to share a directory so that two

# users can place files there that will be owned by the specific users. In this

# setup, the directory should be writable by both users and should have the

# sticky bit set on it to prevent abuse. Obviously this could be extended to

# as many users as required.

;[myshare]

;   comment = Mary's and Fred's stuff

;   path = /usr/somewhere/shared

;   valid users = mary fred

;   public = no

;   writable = yes

;   printable = no

;   create mask = 0765

 

 [exporthome]                       <<<<<這是分享的名稱

   comment = export_home_samba      <<<<<分享的說明

   path = /export/home/samba          <<<<<分享的路徑

   guest ok = yes                    <<<<<guest的使用者是否可以使用

   browseable = yes                  <<<<<可否瀏覽

   writable = yes                    <<<<<<可否寫入

   public = yes                     <<<<<<是否所有的人都可以看的到

   share modes = no

   create mask = 0766

[cdrom]

  comment = cdrom_share

  path = /cdrom/cdrom0

  guest ok = yes

  browseable = yes

  writable = yes

  public = yes

  share modes = no

 

最後就連上線了如下圖

中文檔名的上傳測試

這樣應該就ok啦